(I was one of the bloggers selected by True Value to work on the DIY Squad. I have been compensated for my time commitment to the program as well as writing about my experience. I have also been compensated for the materials needed for my DIY project. However, my opinions are entirely my own and I have not been paid to publish positive comments.)
One big job I’ve wanted to tackle since moving in is cleaning out the rain gutters. For some reason, presumably leaves and debris, they overflow when it rains yet hardly any water actually exits the downspout.
I finally got up the energy and drug the ladder out to see what’s the deal with the gutters…
Holy guacamole, they were crammed to the hilt with copious amounts of leaves and sludge.
The previous owners apparently tried to remedy the leaves situation by installing some leaf guard mesh stuff. I’m sure at one point it worked great, but after years of rotting in the gutters, it had caved in on itself and leaves filled up on top of it – pretty much defeats the purpose of the leaf guard.
I grabbed a small
shovel trowel (I totally had to google that. I’m obviously not a gardener!) and got to work digging the built up sludge. It was mainly leaves, but also a sludgy material on the bottom consisting of decomposing leaves, dirt, and lots of gravel-looking stuff that came off the shingles.
Once the bulk of the gross stuff was cleaned out I figured the best way to clean out the rest of the gunk was to just wash it out with the garden hose. It worked perfectly, probably considering the gutters were made for, well, water. Dur.
Enter True Value Hardware. I found all sorts of awesome goodies for rain gutters (am I the only person that geeks out over cool gadgets and gizmos for rain gutters? Yes? Thought so.) on their website and placed my order. (If you ship the items to your closest store and pick it up there they don’t charge you any shipping. Woot woot!)
My goal with the Gutter Screens is to block all leaves AND SQUIRRELS from getting in the gutters. Random side story: Ben’s grandma used to live in Arizona, and she was obsessed with squirrels. She said they didn’t have any where she lived. I used to laugh when she would come visit and flip out over squirrels because we have TOO MANY squirrels here and they are a nuisance. Squirrels and deer, oh my word.
The weather finally got nicer and the clouds parted and it was time to install the Gutter Screens. I was a tad naive in my excitement. I installed the first one and got a big ol’ womp-womp. They were too big.
Oops. I guess not all gutters are created equally. Should have measured before buying! Lesson learned.
Never one to take no for an answer, I decided to cut them to size. Seemed like a logical option.
Worked like a charm. It’s almost like it was meant to be. Except the edge looked terrible.
So I just tucked it under the lip of the gutter. To be perfectly honest, I like my way of installing them even better. They are suppose to sit on top of the gutter, but they seemed so floppy that way – like they might fall off, and tucking them under really wedges them in and makes them feel very secure.
After the first guard was installed and cut while in place, I wised up and realized it’s much easier to cut them before installing them. If you ever install these in your gutters, cut them first, then install.
Okay, so lets talk about the installation process. The Gutter Screens have a clip-like edge on one side that clips snugly around the flashing under the shingles.
What is flashing? I’m so glad you asked! Flashing is sheet metal installed at any break in a shingled roofline to prevent leaks. I found this nifty diagram that shows you exactly where your flashing is located.
Here’s a close-up of the Gutter Screen attached to the flashing under the shingles. It took a little maneuvering around the shingles to get the guards on, but once in place they fit like a glove.
The corners were a little bit more tricky, but honestly, they ended up being my favorite part of the installation because they broke up the monotony of installing guard after guard. I just cut the guard at a 45 degree angle (totally eye-balled it) and popped it in.
One side done…
And a perfect 90 degree angle right there folks.
Here they are, all installed and looking fly.
Is it weird that I get giddy-excited and proud when I look at the corners? Ya, it’s probably weird. Just pretend like I didn’t say that. Ahem. Oh, check out the Decorative Splash Block below the corner. I totally got both items in the same photo.
Speaking of the Splash Blocks, not only are they “decorative”, they also are functional and help direct water away from your foundation. Had the gutter down spouts not been totally clogged with gross leaves before I cleaned them all out, water would have been drowning our foundation which is apparently not good for it. I figured if I was going to clean out the gutters I better direct all the future rain away from the foundation a la these handy splash blocks.
I think we have some weeding in the not so distant future…
Are you ready for outdoor Spring Cleaning? How often do you clean out your gutters? Ever? This is the first house I’ve ever owned that had gutters, so this was a new experience for me. Hopefully the new gutter guards will keep all the gunk out of the gutters so I don’t have to clean them out again any time soon!